220 A course electron stepless speed control.
Charging time: Around 180 minutes
The FEIYUE FY-03 EAGLE-3 for transferring utilizes a 380 class large power engine, making the automobile strong! Equipped with a 220 A course electron speed control that is step-less, you have control. Of course we mentioned this is really a RC Car, therefore it goes like it. Because of this, back wheel and front are set up with the addition of rigidity to pulverous metal. For the ground hydraulic pressure is used by the automobile. The tires are equipped with abrasion and antiskid proof rubberized.
The FEIYUE FY-03 EAGLE-3 is a wonderful 4WD vehicle in a scale 1:12. It’s especially made for racing and also for competition!
4WD pushed all time.
Working period: About 15 minutes
Front/rearwheel pushed all installation pulverous metal adding rigidity optional gear.
Battery measurements: 85 * 35 * 18mm
Brand title: FEIYUE MODEL
The FEIYUE FY-03 EAGLE-3 as we said in the start, is a off-road race car. It’s made from ABS and comes in green and red. Has a Left/right hand controller for a controller and using a RTR model. For controlling applications a 2.4 GHz radio system using a four wheel drive. The components are made from alloy for endurance and the car is 1:12 scale of the one! The FY-03 is acceptable for children over 14 years of age. Weights 1226 comes 389 x 225 x 170mm and g.
Battery Power: 7.4V 1500mAh
This RC car is not difficult to operate, with metal chassis structure control simulation, so it may limberly move forwards and back, and turn right and left. It is made for competition.
Remote controller frequency: 2.4GHz
Controller manner: Left/right hand throttle
Colour: red / green discretionary
The battery’s measurements are 85 x 35 x 18mm. You’ll need approximately 180 minutes that the automobile can be driven by you wild and to fully charge the battery. For the remote control you may want 4 x 1.5V AA batteries.
With antiskid and abrasion proof rubberized tire.
380 course large power engine.